Aluminum composite panel production line

ACP Panel, Aluminum Composite Panel Production Machine Line

Description

The aluminum composite panel production machine line is designed for making the composite sandwich panel. The complete process is as follows:

•  First, the PE panel, extruded continuously by special extruder, the thickness of which adjusted by the T-die, is to be cooled by a three-roller calender and then compounded with polymer adhesive film.

•  Second, preheating the aluminum sheet through the preheat roller.

•  Third, waste heat of the PE core panel is used to pre compound the PE panel with upper and lower aluminum sheets in the first and second sets of compound machine unit at proper temperature.

•  After that, through the process of hot press rolling, finish rolling, cooling, flattening, trimming and coating with protective film, the aluminum composite panel is to be cut into the specified size and then we get the final product.

Features

1. High capacity, full range of specifications, and the thickness of aluminum composite panel varies from 1mm to 8mm

2. The thickness of aluminum sheet for compounding ranges from 0.018mm to 0.5mm

3. Recycled PE material can be used

4. Mature technics and simple operation

Parameters of composite panel

•  Width: 800-1300mm or 800-1600mm

•  Thickness: 1~8mm

•  Length: set by production requirements

Application

The aluminum composite panel can be widely applied to various architectural decorations, such as exterior wall of building, facade decoration, ceiling, column, furniture, elevator, storefront, billboard, bus and train box, partition wall material for aircraft and ships, as well as outer box of equipment and instruments.